93% granulating rate of disc granulation machine

 1.The angle of the
granulating disc adopts the whole round arc structure,which can make sure the rate of granulation is up to 93% and even above it.
2.Granulation disk has three discharging holes which are convenient for intermittent production, and which can greatly reduce the labor intensity and improve working efficiency.
3.the disc type
fertilizer granulator is Driven by flexible belt, the retarder and electromotor start stable, which decrease the impulse force and lengthen the life-span of the equipment.
4. The bottom of granulating disk is strengthened by many radiation steel-plates, which is firm, durable and never distortion.
5.The thickened, weighted and firm base can run stably without the holding down bolts to fix.
6.The main gear of granulation is hardened by high frequency quenching, which makes its service life double time than before.

The pan revolves at a certain angle with the horizontal plane driven by the motor through reducer.. The powder will rise along with the revolving pan under the friction between the powder and the pan, on the other hand, the powder will fall down under the function of its gravity. At the same time, the powder is to the pan edge because of the centrifugal force. The powder material rolls in a certain trace under the function of these three forces. It gradually becomes the required size, then overflows by the pan edge. the
disc organic fertilizer making machine has the advantages of high granulating rate, homogeneous grain, high strength, easy to operate, convenient maintenance.

Working principle
1. All kinds of dry materials enter into the disk type
manure pellet mill from the roof of it, and then are transported to rabbet after degassing and compressing.
2. Then the two rollers rotate towards opposite directions with a same speed, and press the materials. Materials enter into disc pellet making machine naturally because of gravity and tension.
3. After that, the materials will be transported to vibrating screen to be separated.
4. At last, the qualified products will be transported to finished product warehouse or be parked directly. The unqualified materials will come back to feeder machine and be re-crushed.