fertilizer granulating machine with higher pressure to make granules

Organic fertilizer granulating machine is a cubage measuring feeding equipment; the fertilizer granulating machine supplies materials to the next procedure evenly and continuously; at the same time, it can bear relatively higher pressure.
Hot sale round
disk granulating machine is a fine powdery material feeder suitable for non-cohesive materials like coal powder, cement, chamotte, limestone, shale, gangue and clunch. It is widely used in gold concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding.
Organic fertilizer granulation use organic sludge, chicken manure, straw after fermentation as raw materials.
1Mixed feed granulation With corn flour, grass meal, soybean meal as raw material
2Deodorization sterile efficient fertilizer with livestock and poultry manure, city life garbage by microbial fermentation technology
manure pellet mill can be applied to crude fibre granulation, rice husk, cotton seed, construction waste, etc.
disc granulation machine is widely used in transporting powdery, beaded or small state of all kinds of viscous material, such as coal, cement, clinker, fertilizer and other materials.


1. The disk angle is designed with circular arc structure. Hence, the granulation rate may reach 93% or above.
2. The disk of our ball shape disc granulator is designed with three discharging holes,
which is convenient for intermittent production work. This largely reduces labor intensity and increases working efficiency.
3. The reducer and motor of our ball shape disc granulator are both driven by flexible belt,
which ensures stable start, reduced impact force and longer service life.
4. Disc bottom is reinforced by multi-strip radiation steel plates, so it is wear resistant, durable and will never deform.
5. Thickened and strengthened granulator-base provides our disc pelletizer with stable operation.
Therefore, our disc pelletizer is no need to be fixed by foundation bolts. 
organic fertilizer granules 

93% granulating rate of disc granulation machine

 1.The angle of the
granulating disc adopts the whole round arc structure,which can make sure the rate of granulation is up to 93% and even above it.
2.Granulation disk has three discharging holes which are convenient for intermittent production, and which can greatly reduce the labor intensity and improve working efficiency.
3.the disc type
fertilizer granulator is Driven by flexible belt, the retarder and electromotor start stable, which decrease the impulse force and lengthen the life-span of the equipment.
4. The bottom of granulating disk is strengthened by many radiation steel-plates, which is firm, durable and never distortion.
5.The thickened, weighted and firm base can run stably without the holding down bolts to fix.
6.The main gear of granulation is hardened by high frequency quenching, which makes its service life double time than before.

The pan revolves at a certain angle with the horizontal plane driven by the motor through reducer.. The powder will rise along with the revolving pan under the friction between the powder and the pan, on the other hand, the powder will fall down under the function of its gravity. At the same time, the powder is to the pan edge because of the centrifugal force. The powder material rolls in a certain trace under the function of these three forces. It gradually becomes the required size, then overflows by the pan edge. the
disc organic fertilizer making machine has the advantages of high granulating rate, homogeneous grain, high strength, easy to operate, convenient maintenance.

Working principle
1. All kinds of dry materials enter into the disk type
manure pellet mill from the roof of it, and then are transported to rabbet after degassing and compressing.
2. Then the two rollers rotate towards opposite directions with a same speed, and press the materials. Materials enter into disc pellet making machine naturally because of gravity and tension.
3. After that, the materials will be transported to vibrating screen to be separated.
4. At last, the qualified products will be transported to finished product warehouse or be parked directly. The unqualified materials will come back to feeder machine and be re-crushed.